2021
|
| 42. |  | M. G. Ruppert; N. F. S. de Bem; A. J. Fleming; Y. K. Yong Characterization of Active Microcantilevers Using Laser Doppler Vibrometry Book Chapter In: Vibration Engineering for a Sustainable Future
, Chapter 45, Springer, 2021, ISBN: 978-3-030-48153-7. @inbook{Ruppert2021b,
title = {Characterization of Active Microcantilevers Using Laser Doppler Vibrometry},
author = {M. G. Ruppert and N. F. S. de Bem and A. J. Fleming and Y. K. Yong},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2022/03/BC21a.pdf},
doi = {10.1007/978-3-030-48153-7},
isbn = {978-3-030-48153-7},
year = {2021},
date = {2021-06-18},
urldate = {2021-06-18},
booktitle = {Vibration Engineering for a Sustainable Future
},
issuetitle = {Experiments, Materials and Signal Processing, Vol. 2},
publisher = {Springer},
chapter = {45},
abstract = {Active atomic force microscope cantilevers with on-chip actuation and sensing provide several advantages over passive cantilevers which rely on piezoacoustic base-excitation and the optical beam deflection measurement. Most importantly, these cantilevers provide clean frequency responses, the possibility of down-scaling and parallelization to cantilever arrays as well as the absence of optical interferences. In this paper, we demonstrate the analysis and calibration steps for three active cantilever geometries with integrated piezoelectric actuation. For this purpose, laser Doppler vibrometry (LDV) is used to experimentally obtain the deflection mode shapes of the first three eigenmodes, calibrate actuation gains, and to determine the dynamic modal stiffnesses using the Brownian spectrum of the cantilever. The experimental values are compared with finite element simulations.},
keywords = {AFM, Cantilever, MEMS, Piezoelectric Transducers and Drives, Smart Structures},
pubstate = {published},
tppubtype = {inbook}
}
Active atomic force microscope cantilevers with on-chip actuation and sensing provide several advantages over passive cantilevers which rely on piezoacoustic base-excitation and the optical beam deflection measurement. Most importantly, these cantilevers provide clean frequency responses, the possibility of down-scaling and parallelization to cantilever arrays as well as the absence of optical interferences. In this paper, we demonstrate the analysis and calibration steps for three active cantilever geometries with integrated piezoelectric actuation. For this purpose, laser Doppler vibrometry (LDV) is used to experimentally obtain the deflection mode shapes of the first three eigenmodes, calibrate actuation gains, and to determine the dynamic modal stiffnesses using the Brownian spectrum of the cantilever. The experimental values are compared with finite element simulations. |
| 41. |  | M. G. Ruppert; A. J. Fleming; Y. K. Yong Active atomic force microscope cantilevers with integrated device layer piezoresistive sensors Journal Article In: Sensors & Actuators: A. Physical, vol. 319, pp. 112519, 2021, ISSN: 0924-4247. @article{Ruppert2021,
title = {Active atomic force microscope cantilevers with integrated device layer piezoresistive sensors},
author = {M. G. Ruppert and A. J. Fleming and Y. K. Yong},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2021/01/J21a.pdf},
doi = {10.1016/j.sna.2020.112519},
issn = {0924-4247},
year = {2021},
date = {2021-01-19},
urldate = {2021-01-19},
journal = {Sensors & Actuators: A. Physical},
volume = {319},
pages = {112519},
abstract = {Active atomic force microscope cantilevers with on-chip actuation and sensing provide several advantages over
passive cantilevers which rely on piezoacoustic base-excitation and optical beam deflection measurement. Active
microcantilevers exhibit a clean frequency response, provide a path-way to miniturization and parallelization and
avoid the need for optical alignment. However, active microcantilevers are presently limited by the feedthrough
between actuators and sensors, and by the cost associated with custom microfabrication. In this work, we propose
a hybrid cantilever design with integrated piezoelectric actuators and a piezoresistive sensor fabricated from the
silicon device layer without requiring an additional doping step. As a result, the design can be fabricated using a
commercial five-mask microelectromechanical systems fabrication process. The theoretical piezoresistor sensitivity
is compared with finite element simulations and experimental results obtained from a prototype device. The
proposed approach is demonstrated to be a promising alternative to conventional microcantilever actuation and
deflection sensing},
keywords = {AFM, Cantilever, MEMS, Sensors, Smart Structures},
pubstate = {published},
tppubtype = {article}
}
Active atomic force microscope cantilevers with on-chip actuation and sensing provide several advantages over
passive cantilevers which rely on piezoacoustic base-excitation and optical beam deflection measurement. Active
microcantilevers exhibit a clean frequency response, provide a path-way to miniturization and parallelization and
avoid the need for optical alignment. However, active microcantilevers are presently limited by the feedthrough
between actuators and sensors, and by the cost associated with custom microfabrication. In this work, we propose
a hybrid cantilever design with integrated piezoelectric actuators and a piezoresistive sensor fabricated from the
silicon device layer without requiring an additional doping step. As a result, the design can be fabricated using a
commercial five-mask microelectromechanical systems fabrication process. The theoretical piezoresistor sensitivity
is compared with finite element simulations and experimental results obtained from a prototype device. The
proposed approach is demonstrated to be a promising alternative to conventional microcantilever actuation and
deflection sensing |
2019
|
| 40. |  | M. Omidbeike; Y. K. Yong; S. I. Moore; A. J. Fleming
A Five-Axis Monolithic Nanopositioning Stage Constructed from a Bimorph Piezoelectric Sheet Proceedings Article In: International Conference on Manipulation, Automation and Robotics at Small Scales , Helsinki, Finland, 2019, ISSN: 978-1-7281-0948-0. @inproceedings{omidbeike2019axis},
title = {A Five-Axis Monolithic Nanopositioning Stage Constructed from a Bimorph Piezoelectric Sheet},
author = {M. Omidbeike and Y. K. Yong and S. I. Moore and A. J. Fleming
},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2021/02/C19a.pdf},
doi = {10.1109/MARSS.2019.8860940},
issn = {978-1-7281-0948-0},
year = {2019},
date = {2019-07-02},
urldate = {2019-07-02},
booktitle = {International Conference on Manipulation, Automation and Robotics at Small Scales },
journal = {Int. Conference on Manipulation, Automation and Robotics at Small Scales (MARSS)},
address = {Helsinki, Finland},
abstract = {The paper describes design, modeling and control of a five-axis monolithic nanopositioning stage constructed from a bimorph piezoelectric sheet. In this design, actuators are created by removing parts of the sheet using ultrasonic machining. The constructed nanopositioner is ultra-compact with a thickness of 1 mm. It has a X and Y travel range of 15.5 µm and 13.2 µm respectively; a Z travel range of 26 µm; and a rotational motion about the X-and Y-axis of 600 µrad and 884 µrad respectively. The first resonance frequency occurs at 883 Hz in the Z-axis, and the second and third resonance frequency appears at 1850 Hz, rotating about the X-and Y-axis. A decentralized control strategy is implemented to track Z, θx and θy motions. The controller provides good tracking and significantly reduces cross-coupling motions among the three degrees-of-freedom.},
keywords = {Nanopositioning, Smart Structures, Tracking Control},
pubstate = {published},
tppubtype = {inproceedings}
}
The paper describes design, modeling and control of a five-axis monolithic nanopositioning stage constructed from a bimorph piezoelectric sheet. In this design, actuators are created by removing parts of the sheet using ultrasonic machining. The constructed nanopositioner is ultra-compact with a thickness of 1 mm. It has a X and Y travel range of 15.5 µm and 13.2 µm respectively; a Z travel range of 26 µm; and a rotational motion about the X-and Y-axis of 600 µrad and 884 µrad respectively. The first resonance frequency occurs at 883 Hz in the Z-axis, and the second and third resonance frequency appears at 1850 Hz, rotating about the X-and Y-axis. A decentralized control strategy is implemented to track Z, θx and θy motions. The controller provides good tracking and significantly reduces cross-coupling motions among the three degrees-of-freedom. |
| 39. |  | D. M. Harcombe; M. G. Ruppert; A. J. Fleming Modeling and Noise Analysis of a Microcantilever-based Mass Sensor Proceedings Article In: Int. Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Helsinki, Finland, 2019, ISSN: 978-1-7281-0948-0. @inproceedings{Harcombe2019,
title = {Modeling and Noise Analysis of a Microcantilever-based Mass Sensor},
author = {D. M. Harcombe and M. G. Ruppert and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2021/02/C19c.pdf},
doi = {10.1109/MARSS.2019.8860982},
issn = {978-1-7281-0948-0},
year = {2019},
date = {2019-07-01},
booktitle = {Int. Conference on Manipulation, Automation and Robotics at Small Scales (MARSS)},
address = {Helsinki, Finland},
abstract = {Nanomechanical devices have the potential for practical applications as mass sensors. In microcantilever based sensing, resonance frequency shifts are tracked by a
phase-locked loop (PLL) in-order to monitor mass adsorption. A major challenge in minimizing the mass detection limit comes from the noise present in the system due to thermal, sensor and oscillator noise. There is numerical difficulty in simulating PLLs, as both low frequency phase estimates and high frequency mixing products need to be captured resulting in a stiff problem. By using linear system-theoretic modeling an in-depth analysis of the system is able to be conducted overcoming this issue. This provides insight into individual noise source propagation, dominant noise sources and possible ways to reduce their effects. The developed model is verified in simulation against the non-linear PLL, with each achieving low picogram sensitivity for a 100 Hz loop bandwidth and realistically modeled noise sources.},
keywords = {AFM, Cantilever, MEMS, Sensors, Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
Nanomechanical devices have the potential for practical applications as mass sensors. In microcantilever based sensing, resonance frequency shifts are tracked by a
phase-locked loop (PLL) in-order to monitor mass adsorption. A major challenge in minimizing the mass detection limit comes from the noise present in the system due to thermal, sensor and oscillator noise. There is numerical difficulty in simulating PLLs, as both low frequency phase estimates and high frequency mixing products need to be captured resulting in a stiff problem. By using linear system-theoretic modeling an in-depth analysis of the system is able to be conducted overcoming this issue. This provides insight into individual noise source propagation, dominant noise sources and possible ways to reduce their effects. The developed model is verified in simulation against the non-linear PLL, with each achieving low picogram sensitivity for a 100 Hz loop bandwidth and realistically modeled noise sources. |
| 38. |  | M. G. Ruppert; B. S. Routley; A. J. Fleming; Y. K. Yong; G. E. Fantner Model-based Q Factor Control for Photothermally Excited Microcantilevers Proceedings Article In: Int. Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Helsinki, Finland, 2019, ISSN: 978-1-7281-0948-0. @inproceedings{Ruppert2019,
title = {Model-based Q Factor Control for Photothermally Excited Microcantilevers},
author = {M. G. Ruppert and B. S. Routley and A. J. Fleming and Y. K. Yong and G. E. Fantner},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2021/02/C19b.pdf},
doi = {10.1109/MARSS.2019.8860969},
issn = {978-1-7281-0948-0},
year = {2019},
date = {2019-07-01},
booktitle = {Int. Conference on Manipulation, Automation and Robotics at Small Scales (MARSS)},
address = {Helsinki, Finland},
abstract = {Photothermal excitation of the cantilever for dynamic atomic force microscopy (AFM) modes is an attractive actuation method as it provides clean cantilever actuation leading to well-defined frequency responses. Unlike conventional piezo-acoustic excitation of the cantilever, it allows for model-based quality (Q) factor control in order to increase the cantilever tracking bandwidth for tapping-mode AFM or to reduce resonant ringing for high-speed photothermal offresonance tapping (PORT) in ambient conditions. In this work, we present system identification, controller design and experimental results on controlling the Q factor of a photothermally driven cantilever. The work is expected to lay the groundwork for future implementations for high-speed PORT imaging in ambient conditions.},
keywords = {AFM, Multifrequency AFM, Sensors, Smart Structures, SPM, Vibration Control},
pubstate = {published},
tppubtype = {inproceedings}
}
Photothermal excitation of the cantilever for dynamic atomic force microscopy (AFM) modes is an attractive actuation method as it provides clean cantilever actuation leading to well-defined frequency responses. Unlike conventional piezo-acoustic excitation of the cantilever, it allows for model-based quality (Q) factor control in order to increase the cantilever tracking bandwidth for tapping-mode AFM or to reduce resonant ringing for high-speed photothermal offresonance tapping (PORT) in ambient conditions. In this work, we present system identification, controller design and experimental results on controlling the Q factor of a photothermally driven cantilever. The work is expected to lay the groundwork for future implementations for high-speed PORT imaging in ambient conditions. |
| 37. |  | M. G. Ruppert; S. I. Moore; M. Zawierta; A. J. Fleming; G. Putrino; Y. K. Yong Multimodal atomic force microscopy with optimized higher eigenmode sensitivity using on-chip piezoelectric actuation and sensing Journal Article In: Nanotechnology, vol. 30, no. 8, pp. 085503, 2019. @article{Ruppert2018b,
title = {Multimodal atomic force microscopy with optimized higher eigenmode sensitivity using on-chip piezoelectric actuation and sensing},
author = {M. G. Ruppert and S. I. Moore and M. Zawierta and A. J. Fleming and G. Putrino and Y. K. Yong},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2019/08/Ruppert_2019_Nanotechnology_30_085503.pdf},
doi = {https://doi.org/10.1088/1361-6528/aae40b},
year = {2019},
date = {2019-01-02},
journal = {Nanotechnology},
volume = {30},
number = {8},
pages = {085503},
abstract = {Atomic force microscope (AFM) cantilevers with integrated actuation and sensing provide several distinct advantages over conventional cantilever instrumentation. These include clean frequency responses, the possibility of down-scaling and parallelization to cantilever arrays as well as the absence of optical interference. While cantilever microfabrication technology has continuously advanced over the years, the overall design has remained largely unchanged; a passive rectangular shaped cantilever design has been adopted as the industry wide standard. In this article, we demonstrate multimode AFM imaging on higher eigenmodes as well as bimodal AFM imaging with cantilevers using fully integrated piezoelectric actuation and sensing. The cantilever design maximizes the higher eigenmode deflection sensitivity by optimizing the transducer layout according to the strain mode shape. Without the need for feedthrough cancellation, the read-out method achieves close to zero actuator/sensor feedthrough and the sensitivity is sufficient to resolve the cantilever Brownian motion.},
keywords = {AFM, Cantilever, MEMS, Multifrequency AFM, Piezoelectric Transducers and Drives, Sensors, Smart Structures, SPM},
pubstate = {published},
tppubtype = {article}
}
Atomic force microscope (AFM) cantilevers with integrated actuation and sensing provide several distinct advantages over conventional cantilever instrumentation. These include clean frequency responses, the possibility of down-scaling and parallelization to cantilever arrays as well as the absence of optical interference. While cantilever microfabrication technology has continuously advanced over the years, the overall design has remained largely unchanged; a passive rectangular shaped cantilever design has been adopted as the industry wide standard. In this article, we demonstrate multimode AFM imaging on higher eigenmodes as well as bimodal AFM imaging with cantilevers using fully integrated piezoelectric actuation and sensing. The cantilever design maximizes the higher eigenmode deflection sensitivity by optimizing the transducer layout according to the strain mode shape. Without the need for feedthrough cancellation, the read-out method achieves close to zero actuator/sensor feedthrough and the sensitivity is sufficient to resolve the cantilever Brownian motion. |
2015
|
| 36. |  | Y. R. Teo; A. J. Fleming Optimal integral force feedback for active vibration control Journal Article In: Journal of Sound and Vibration, vol. 356, no. 11, pp. 20-33, 2015. @article{J15c,
title = {Optimal integral force feedback for active vibration control},
author = {Y. R. Teo and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2015/10/J15c.pdf},
year = {2015},
date = {2015-06-27},
journal = {Journal of Sound and Vibration},
volume = {356},
number = {11},
pages = {20-33},
abstract = {This paper proposes an improvement to Integral Force Feedback (IFF), which is a popular method for active vibration control for structures and mechanical systems. Benefits of IFF includes robustness, guaranteed stability and simplicity. However, the maximum damping performance is dependent on the stiffness of the system; hence, some systems cannot be adequately controlled. In this paper, an improvement to the classical force feedback control scheme is proposed. The improved method achieves arbitrary damping for any mechanical system by introducing a feed-through term. The proposed improvement is experimentally demonstrated by actively damping an objective lens assembly for a high-speed confocal microscope.},
keywords = {Nanopositioning, Smart Structures},
pubstate = {published},
tppubtype = {article}
}
This paper proposes an improvement to Integral Force Feedback (IFF), which is a popular method for active vibration control for structures and mechanical systems. Benefits of IFF includes robustness, guaranteed stability and simplicity. However, the maximum damping performance is dependent on the stiffness of the system; hence, some systems cannot be adequately controlled. In this paper, an improvement to the classical force feedback control scheme is proposed. The improved method achieves arbitrary damping for any mechanical system by introducing a feed-through term. The proposed improvement is experimentally demonstrated by actively damping an objective lens assembly for a high-speed confocal microscope. |
2008
|
| 35. | | A. G. Wills; D. Bates; A. J. Fleming; B. Ninness; S. O. R. Moheimani Model predictive control applied to constraint handling in active noise and vibration control Journal Article In: IEEE Transactions on Control Systems Technology, vol. 16, no. 1, pp. 3–12, 2008. @article{J08b,
title = {Model predictive control applied to constraint handling in active noise and vibration control},
author = {A. G. Wills and D. Bates and A. J. Fleming and B. Ninness and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J08b.pdf},
year = {2008},
date = {2008-12-01},
journal = {IEEE Transactions on Control Systems Technology},
volume = {16},
number = {1},
pages = {3--12},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
2007
|
| 34. | | S. S. Aphale; A. J. Fleming; S. O. R. Moheimani Integral resonant control of collocated smart structures Journal Article In: IOP Smart materials and Structures, vol. 16, pp. 439-446, 2007. @article{J07a,
title = {Integral resonant control of collocated smart structures},
author = {S. S. Aphale and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J07a.pdf},
year = {2007},
date = {2007-12-01},
journal = {IOP Smart materials and Structures},
volume = {16},
pages = {439-446},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 33. | | S. S. Aphale; A. J. Fleming; S. O. R. Moheimani Integral control of smart structures with collocated sensors and actuators Proceedings Article In: Proc. European Control Conference, Kos, Greece, 2007. @inproceedings{C07d,
title = {Integral control of smart structures with collocated sensors and actuators},
author = {S. S. Aphale and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C07d.pdf},
year = {2007},
date = {2007-01-01},
booktitle = {Proc. European Control Conference},
address = {Kos, Greece},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 32. | | S. S. Aphale; A. J. Fleming; S. O. R. Moheimani Integral control of collocated smart structures Proceedings Article In: Proc. SPIE Smart Materials and Structures, San Diego, CA, 2007. @inproceedings{D07a,
title = {Integral control of collocated smart structures},
author = {S. S. Aphale and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D07a.pdf},
year = {2007},
date = {2007-01-01},
booktitle = {Proc. SPIE Smart Materials and Structures},
address = {San Diego, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2006
|
| 31. |  | S. O. R. Moheimani; A. J. Fleming Piezoelectric Transducers for Vibration Control and Damping Book Springer-Verlag, London, 2006, ISBN: 1-84628-331-0. @book{B06,
title = {Piezoelectric Transducers for Vibration Control and Damping},
author = {S. O. R. Moheimani and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/B06-front.jpg},
isbn = {1-84628-331-0},
year = {2006},
date = {2006-12-01},
publisher = {Springer-Verlag},
address = {London},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {book}
}
|
2005
|
| 30. | | A. J. Fleming; S. O. R. Moheimani Control oriented synthesis of high performance piezoelectric shunt impedances for structural vibration control Journal Article In: IEEE Transactions on Control Systems Technology, vol. 13, no. 1, pp. 98–112, 2005. @article{J05c,
title = {Control oriented synthesis of high performance piezoelectric shunt impedances for structural vibration control},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J05c.pdf},
year = {2005},
date = {2005-12-01},
journal = {IEEE Transactions on Control Systems Technology},
volume = {13},
number = {1},
pages = {98--112},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 29. | | A. G. Wills; D. Bates; A. J. Fleming; B. Ninness; S. O. R. Moheimani Application of MPC to an active structure using sampling rates up to 25kHz Proceedings Article In: Proc. IEEE Conference on Decision and Control and European Control Conference, pp. 3176–3181, Seville, Spain, 2005. @inproceedings{C05d,
title = {Application of MPC to an active structure using sampling rates up to 25kHz},
author = {A. G. Wills and D. Bates and A. J. Fleming and B. Ninness and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C05d.pdf},
year = {2005},
date = {2005-01-01},
booktitle = {Proc. IEEE Conference on Decision and Control and European Control Conference},
pages = {3176--3181},
address = {Seville, Spain},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2004
|
| 28. | | D. Niederberger; A. J. Fleming; S. O. R. Moheimani; M. Morari Adaptive multimode resonant piezoelectric shunt damping Journal Article In: IOP Smart Materials and Structures, vol. 18, no. 2, pp. 291–315, 2004. @article{J04b,
title = {Adaptive multimode resonant piezoelectric shunt damping},
author = {D. Niederberger and A. J. Fleming and S. O. R. Moheimani and M. Morari},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J04b.pdf},
year = {2004},
date = {2004-12-01},
journal = {IOP Smart Materials and Structures},
volume = {18},
number = {2},
pages = {291--315},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 27. | | S. O. R. Moheimani; A. J. Fleming; S. Behrens Dynamics, Stability and Control of Multivariable Piezoelectric Shunts Journal Article In: IEEE/ASME Transactions on Mechatronics, vol. 9, no. 1, pp. 87–99, 2004. @article{J04a,
title = {Dynamics, Stability and Control of Multivariable Piezoelectric Shunts},
author = {S. O. R. Moheimani and A. J. Fleming and S. Behrens},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J04a.pdf},
year = {2004},
date = {2004-01-01},
journal = {IEEE/ASME Transactions on Mechatronics},
volume = {9},
number = {1},
pages = {87--99},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 26. | | D. Niederberger; A. J. Fleming; S. O. R. Moheimani; M. Morari Online-tuned multi-mode resonant piezoelectric shunt for broadband vibration suppression Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Sydney, Australia, 2004. @inproceedings{C04a,
title = {Online-tuned multi-mode resonant piezoelectric shunt for broadband vibration suppression},
author = {D. Niederberger and A. J. Fleming and S. O. R. Moheimani and M. Morari},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C04a.pdf},
year = {2004},
date = {2004-01-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Sydney, Australia},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 25. | | A. J. Fleming; S. O. R. Moheimani Optimal impedance design for piezoelectric vibration control Proceedings Article In: Proc. IEEE Conference on Decision and Control, Bahamas, 2004. @inproceedings{C04c,
title = {Optimal impedance design for piezoelectric vibration control},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C04c.pdf},
year = {2004},
date = {2004-01-01},
booktitle = {Proc. IEEE Conference on Decision and Control},
address = {Bahamas},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 24. | | S. Behrens; A. J. Fleming; S. O. R. Moheimani Negative inductor-resistor controller for electromagnetic shunt damping Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Sydney, Australia, 2004. @inproceedings{C04e,
title = {Negative inductor-resistor controller for electromagnetic shunt damping},
author = {S. Behrens and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C04e.pdf},
year = {2004},
date = {2004-01-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Sydney, Australia},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 23. | | A. J. Fleming; S. O. R. Moheimani Synthesis of optimal piezoelectric shunt impedances for structural vibration control Proceedings Article In: Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation, San Diego, CA, 2004. @inproceedings{D04b,
title = {Synthesis of optimal piezoelectric shunt impedances for structural vibration control},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D04b.pdf},
year = {2004},
date = {2004-01-01},
booktitle = {Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation},
address = {San Diego, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 22. | | A. J. Fleming Synthesis and implementation of sensor-less shunt controllers for piezoelectric and electromagnetic vibration control PhD Thesis University of Newcastle, 2004. @phdthesis{PhD04,
title = {Synthesis and implementation of sensor-less shunt controllers for piezoelectric and electromagnetic vibration control},
author = {A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/uploads/2017/11/10.1.1.386.3374.pdf},
year = {2004},
date = {2004-01-01},
school = {University of Newcastle},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {phdthesis}
}
|
2003
|
| 21. |  | S. O. R. Moheimani; D. Halim; A. J. Fleming Spatial Control of Vibration: Theory and Experiments Book World Scientific, 2003, ISBN: 981-238-337-9. @book{B03,
title = {Spatial Control of Vibration: Theory and Experiments},
author = {S. O. R. Moheimani and D. Halim and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/B03-front.jpg
https://www.precisionmechatronicslab.com/wp-content/publications/B03-page1.jpg
https://www.precisionmechatronicslab.com/wp-content/publications/B03-rear.jpg},
isbn = {981-238-337-9},
year = {2003},
date = {2003-12-01},
publisher = {World Scientific},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {book}
}
|
| 20. | | S. O. R. Moheimani; A. J. Fleming; S. Behrens On the feedback structure of wideband piezoelectric shunt damping systems Journal Article In: IOP Smart Materials and Structures, vol. 12, no. 1, pp. 49–56, 2003. @article{J03d,
title = {On the feedback structure of wideband piezoelectric shunt damping systems},
author = {S. O. R. Moheimani and A. J. Fleming and S. Behrens},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J03d.pdf},
year = {2003},
date = {2003-01-01},
journal = {IOP Smart Materials and Structures},
volume = {12},
number = {1},
pages = {49--56},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 19. | | A. J. Fleming; S. O. R. Moheimani An autonomous piezoelectric resonant shunt damping system Proceedings Article In: Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation, San Diego, CA, 2003. @inproceedings{D03a,
title = {An autonomous piezoelectric resonant shunt damping system},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D03a.pdf},
year = {2003},
date = {2003-01-01},
booktitle = {Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation},
address = {San Diego, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 18. | | S. Behrens; A. J. Fleming; S. O. R. Moheimani Robust piezoelectric passive shunt dampener Proceedings Article In: Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation, San Diego, CA, 2003. @inproceedings{D03c,
title = {Robust piezoelectric passive shunt dampener},
author = {S. Behrens and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D03c.pdf},
year = {2003},
date = {2003-01-01},
booktitle = {Proc. SPIE Symposium on Smart Structures & Materials -- Damping and Isolation},
address = {San Diego, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 17. | | S. Behrens; A. J. Fleming; S. O. R. Moheimani A broadband controller for shunt piezoelectric damping of structural vibration Journal Article In: IOP Smart Materials and Structures, vol. 12, no. 1, pp. 36–48, 2003. @article{J03a,
title = {A broadband controller for shunt piezoelectric damping of structural vibration},
author = {S. Behrens and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J03a.pdf},
year = {2003},
date = {2003-01-01},
journal = {IOP Smart Materials and Structures},
volume = {12},
number = {1},
pages = {36--48},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 16. | | A. J. Fleming; S. O. R. Moheimani Adaptive piezoelectric shunt damping Journal Article In: IOP Smart Materials and Structures, vol. 12, no. 1, pp. 18–28, 2003. @article{J03b,
title = {Adaptive piezoelectric shunt damping},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J03b.pdf},
year = {2003},
date = {2003-01-01},
journal = {IOP Smart Materials and Structures},
volume = {12},
number = {1},
pages = {18--28},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 15. | | S. Behrens; S. O. R. Moheimani; A. J. Fleming Multiple mode current flowing passive piezoelectric shunt controller Journal Article In: Journal of Sound and Vibration, vol. 266, no. 5, pp. 929–942, 2003. @article{J03f,
title = {Multiple mode current flowing passive piezoelectric shunt controller},
author = {S. Behrens and S. O. R. Moheimani and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J03f.pdf},
year = {2003},
date = {2003-01-01},
journal = {Journal of Sound and Vibration},
volume = {266},
number = {5},
pages = {929--942},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 14. | | A. J. Fleming; S. O. R. Moheimani; S. Behrens Reducing the Inductance Requirements of Piezoelectric Shunt Damping Circuits Journal Article In: IOP Smart Materials and Structures, vol. 12, no. 1, pp. 57–64, 2003. @article{J03c,
title = {Reducing the Inductance Requirements of Piezoelectric Shunt Damping Circuits},
author = {A. J. Fleming and S. O. R. Moheimani and S. Behrens},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J03c.pdf},
year = {2003},
date = {2003-01-01},
journal = {IOP Smart Materials and Structures},
volume = {12},
number = {1},
pages = {57--64},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
2002
|
| 13. | | A. J. Fleming; S. O. R. Moheimani The effect of artificially reducing the size of inductor values in piezoelectric shunt damping circuits Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Berkeley, CA, 2002. @inproceedings{C02e,
title = {The effect of artificially reducing the size of inductor values in piezoelectric shunt damping circuits},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C02e.pdf},
year = {2002},
date = {2002-12-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Berkeley, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 12. | | A. J. Fleming; S. O. R. Moheimani Power harvesting piezoelectric shunt damping Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Berkeley, CA, 2002. @inproceedings{C02d,
title = {Power harvesting piezoelectric shunt damping},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C02d.pdf},
year = {2002},
date = {2002-12-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Berkeley, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 11. | | S. O. R. Moheimani; S. Behrens; A. J. Fleming Dynamics and stability of wideband vibration absorbers with multiple piezoelectric transducers Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Berkeley, CA, 2002. @inproceedings{C02b,
title = {Dynamics and stability of wideband vibration absorbers with multiple piezoelectric transducers},
author = {S. O. R. Moheimani and S. Behrens and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C02b.pdf},
year = {2002},
date = {2002-12-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Berkeley, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 10. | | S. O. R. Moheimani; A. J. Fleming; S. Behrens On the feedback structure of wideband piezoelectric shunt damping systems Proceedings Article In: Proc. IFAC World Congress, Barcelona, Spain, 2002. @inproceedings{C02a,
title = {On the feedback structure of wideband piezoelectric shunt damping systems},
author = {S. O. R. Moheimani and A. J. Fleming and S. Behrens},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C02a.pdf},
year = {2002},
date = {2002-07-01},
booktitle = {Proc. IFAC World Congress},
address = {Barcelona, Spain},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 9. | | A. J. Fleming; S. O. R. Moheimani Adaptive piezoelectric shunt damping Proceedings Article In: Proc. SPIE Symposium on Smart Structures and Materials -- Industrial and Commercial Applications of Smart Structures Technologies, San Diego, CA, 2002. @inproceedings{D02a,
title = {Adaptive piezoelectric shunt damping},
author = {A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D02a.pdf},
year = {2002},
date = {2002-01-01},
booktitle = {Proc. SPIE Symposium on Smart Structures and Materials -- Industrial and Commercial Applications of Smart Structures Technologies},
address = {San Diego, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 8. | | S. Behrens; A. J. Fleming; S. O. R. Moheimani Series-parallel impedance structure for piezoelectric vibration damping Proceedings Article In: Proc. SPIE International Symposium on Smart Materials, Nano, and Micro-Smart Systems, Melbourne, Australia, 2002. @inproceedings{D02b,
title = {Series-parallel impedance structure for piezoelectric vibration damping},
author = {S. Behrens and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D02b.pdf},
year = {2002},
date = {2002-01-01},
booktitle = {Proc. SPIE International Symposium on Smart Materials, Nano, and Micro-Smart Systems},
address = {Melbourne, Australia},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 7. | | A. J. Fleming; S. Behrens; S. O. R. Moheimani Optimization and implementation of multi-mode piezoelectric shunt damping systems Journal Article In: IEEE/ASME Transactions on Mechatronics, vol. 7, no. 1, pp. 87–94, 2002. @article{J02a,
title = {Optimization and implementation of multi-mode piezoelectric shunt damping systems},
author = {A. J. Fleming and S. Behrens and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J02a.pdf},
year = {2002},
date = {2002-01-01},
journal = {IEEE/ASME Transactions on Mechatronics},
volume = {7},
number = {1},
pages = {87--94},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 6. | | S. Behrens; S. O. R. Moheimani; A. J. Fleming Multiple mode passive piezoelectric shunt dampener Proceedings Article In: Proc. IFAC Symposium on Mechatronic Systems, Berkeley, CA, 2002. @inproceedings{C02f,
title = {Multiple mode passive piezoelectric shunt dampener},
author = {S. Behrens and S. O. R. Moheimani and A. J. Fleming},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C02f.pdf},
year = {2002},
date = {2002-01-01},
booktitle = {Proc. IFAC Symposium on Mechatronic Systems},
address = {Berkeley, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2001
|
| 5. | | S. Behrens; A. J. Fleming; S. O. R. Moheimani New method for multiple-mode shunt damping of structural vibration using a single piezoelectric transducer Proceedings Article In: Proc. SPIE International Symposium on Smart Structures -- Damping & Isolation, pp. 239–250, New Port Beach, CA, 2001. @inproceedings{D01a,
title = {New method for multiple-mode shunt damping of structural vibration using a single piezoelectric transducer},
author = {S. Behrens and A. J. Fleming and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D01a.pdf},
year = {2001},
date = {2001-01-01},
booktitle = {Proc. SPIE International Symposium on Smart Structures -- Damping & Isolation},
pages = {239--250},
address = {New Port Beach, CA},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 4. | | S. O. R. Moheimani; A. J. Fleming; S. Behrens Highly resonant controller for multimode piezoelectric shunt damping Journal Article In: IEE Electronics Letters, vol. 37, no. 25, pp. 1505–1506, 2001. @article{J01a,
title = {Highly resonant controller for multimode piezoelectric shunt damping},
author = {S. O. R. Moheimani and A. J. Fleming and S. Behrens},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/J01a.pdf},
year = {2001},
date = {2001-01-01},
journal = {IEE Electronics Letters},
volume = {37},
number = {25},
pages = {1505--1506},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {article}
}
|
| 3. | | A. J. Fleming; S. Behrens; S. O. R. Moheimani An impedance synthesizing arrangement, an improved vibrational damping apparatus and a method for deriving a digital signal processing algorithm Miscellaneous Patent, 2001. @misc{P1,
title = {An impedance synthesizing arrangement, an improved vibrational damping apparatus and a method for deriving a digital signal processing algorithm},
author = {A. J. Fleming and S. Behrens and S. O. R. Moheimani},
year = {2001},
date = {2001-01-01},
volume = {Published Application PCT/AU01/00566},
howpublished = {Patent},
keywords = {patent, Smart Structures},
pubstate = {published},
tppubtype = {misc}
}
|
2000
|
| 2. | | A. J. Fleming; S. Behrens; S. O. R. Moheimani A new approach to piezoelectric shunt damping Proceedings Article In: Proc. IS3M International Symposium on Smart Structures and Microsystems, Hong Kong, 2000. @inproceedings{C00b,
title = {A new approach to piezoelectric shunt damping},
author = {A. J. Fleming and S. Behrens and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/C00b.pdf},
year = {2000},
date = {2000-01-01},
booktitle = {Proc. IS3M International Symposium on Smart Structures and Microsystems},
address = {Hong Kong},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
| 1. | | A. J. Fleming; S. Behrens; S. O. R. Moheimani Innovations in piezoelectric shunt damping Proceedings Article In: Proc. SPIE Symposium on Smart Materials and MEMs, Melbourne, Australia, 2000. @inproceedings{D00a,
title = {Innovations in piezoelectric shunt damping},
author = {A. J. Fleming and S. Behrens and S. O. R. Moheimani},
url = {https://www.precisionmechatronicslab.com/wp-content/publications/D00a.pdf},
year = {2000},
date = {2000-01-01},
booktitle = {Proc. SPIE Symposium on Smart Materials and MEMs},
address = {Melbourne, Australia},
keywords = {Smart Structures},
pubstate = {published},
tppubtype = {inproceedings}
}
|
